Glossary
- Antislip Quartz Sand
- Colodur
- Colodur Eco
- Coloured Granules
- Geomax
- Humidity Primer
- Humidity Primer Accelerant
- Impermax
- Impermax 2K
- Impertrans
- Kryptanate
- Pavidur
- Pavifloor
- Paviflex
- PU Primer
- Pur Cat Additive
- Rubber Crumb Binder
- Solvent
- Thixotropic Additive
Tools
Antislip Quartz Sand
Decorative finish which can be applied to (scattered on top) of Colodur 60% and then sealed with Colodur (60% or 40%) applied at 1kg² per coat, available in a variety of colours.
Colodur
This is a single component aliphatic resin which can be used outside or applied a well ventilated indoor area. Clear when applied colour can be added with additive paste (any RAL colour) or with Antislip quartz granules. Colodur is UV stable (non-yellowing) offering strong rigidity, able to withstand heavy traffic & point loading.
View more details.
Weight applied at 0.3 - 0.5kg/m² per coat
Colodur Eco
Two component solvent free high performance Aliphatic Polyurethane resin that is suitable for indoor/ poorly ventilated areas, it provides a hard yet flexible coating with very high abrasion resistance perfect for Floor finishing protection. Clear when applied or can be coloured with additive paste (any RAL colour) or with Antislip quartz granules.
Weight applied at 0.3 - 0.5kg/m² per coat
Coloured Quartz Granules
Quartz granules are add to Colodur PU to give a non-slip finish, a wide range of coloured granules are available to further enhance aesthetic finish of the project.
Geomax
Made of Synthetic fibres, this protective product acts as an additional reinforcement layer which has been especially designed to compliment Impermax. It is 100% compatible with solvents, suitable to reinforce cracks within the substrate or ensure continuity of the membrane in corners where horizontals encounter verticals.
Humidity Primer
Wet or humid surfaces often create problems for resin treatments. Humidity Primer is a good solution when applying liquid waterproofing Polyurethane resins membranes on to substrates showing a humidity value higher than 4%. This is a 2 component product, with a standard cure time between 2-6 hours, cure time can be reduced to less than 2 hours with the addition of humidity primer accelerant.
Weight applied at 0.3 - 0.5kg/m² per coat
Humidity Primer Accelerant
This is a 1 component product which is added to the mixed Humidity Primer. The advantage of Humidity primer accelerant is that it reduces cure time to less than 2 hours.
Impermax
A single component polyurethane liquid, which after polymerisation forms a waterproof polyurethane membrane, Impermax is UV stabilised and can withstand severe building movements, with a 400% elongation limit. Can be used in conjunction with Colodur which gives added protection in area of high traffic.
Weight Applied at 2kg/m²- separated to 2 coats of 1kg/m² -24 hour cure time. See Pur Cat additives.
Alternatively Pur-cat & Super Accelerant can be used to reduce cure time to less than 6 hours. View more details.
Impermax 2K
Impermax 2K - A 2 component polyurethane resin, which is touch dry in minutes forming an elastic membrane, strong enough to bridge fissures. This product is waterproof; it is UV stabilised and is suitable for light traffic. Impermax 2K can be used in conjunction with Colodur which gives added protection in areas of high traffic.
Weight applied at 2kg/m² per coat
Impertrans
A transparent waterproofing flexible membrane for use where the aesthetic of the underlying support (tile mosaic) needs to be preserved.
Weight applied at 0.5 - 0.1kg/m² per coat
Kryptanate
A Highly cost effective resin which coats metal or concrete surfaces providing a strong scratch resistant, highly polished waterproof membrane, compatible with anti-slip quartz- sand, Kryptanate offers a low maintenance surface protection option.
Weight applied at 0.2 - 0.5kg/m² per coat
Pavidur
Single component high performance solvent based moisture curing PU resin, used for indoor flooring and offers heavy resistance to abrasions and chemical agents, very hardwearing.
Weight applied at 0.5kg/m² per coat
Pavifloor
A self levelling 2 component Coloured Solvent free Polyuethane flooring resin. A cure time of 24 hours, Pavifloor may be combined with Colodur as a final hardwearing top coat.
Weight applied at 1- 3kg/m² per coat
Paviflex
100% solvent free polyurethane resin, Paviflex offers a more flexible version of Pavifloor, which feels softer under foot. A self levelling flooring 2 component product offering excellent resistance to most cleaning products as well as to disinfectants used in hospitals oils various acids and basic materials.
Paviflex maybe made none slip with the addition of quartz granules, or given a final top coat of colodur.
Weight applied at 1- 3kg/m² per coat
PU Primer
This product acts as a chemical bond between two elements, i.e the substrate and the polyurethane or waterproofing membrane. Used for priming non absorbent substrates, prior to application of a PU coating, e.g. tiles, steel
Weight applied at 0.1Kilo/m² per coat
Pur Cat Additive
Is an active additive product that enables effective installation of Impermax when outside temperatures are below 5°C, reducing the cure time of Impermax, without impacting the structure of the Impermax component.
Weight applied at Weight applied at a 4 % ratio; 1Kilo/m² of Pur Cat: 25Kg of Impermax
Rubber Crumb Binder
With a high level of elasticity, resistant against both noise & impact vibrations and available in a wide array of colours. This product has many useful applications including Training fields, children's playgrounds, tree protection etc.
Solvent
A hydrophobic product, free of OH compounds 100% Compatible with all Krypton Chemicals products.
Thixotropic Additive
If you mix the thixotropic additive agent in with Impermax, at a ratio of 4%- 1Kilo per 25 Kilos of Impermax. The additive allows for ease of use thickening the resins and enable even distribution upon slopes & verticals.
Tools
Tools - Floor finishing equipment
A rolling brush can be used to apply most of the resin products to the substrate.
To prevent air bubbles, a pin roller can be used to subtract all trapped air particles.
Floor Finish Scraper
A Floor Scraper is can be used to spread wet resin over the surface area, giving an even floor distribution.
Spiked Rollers
Method: roll over the applied P.U product to burst any remaining gas bubbles, give an even smoother finish.
